Shower Upgrade 101 - Top Tips For New Unit Installation

Instant Quote

Just about every person is bound to have their unique idea about How to Install a Direct-to-Stud Shower Enclosure.

A successful shower setup calls for careful preparation and also a lot of job. In most cases, you will certainly need to do three sorts of tasks: mounting wall surfaces, installing the plumbing, and also completing walls.

Prep work

Firstly, you have to choose the sort of shower that you want to install. It is necessary to ascertain whether the selected shower can dealing with particular systems as well as can manage a risk-free degree of water with the boiler. Many shower devices nowadays are designed to be versatile to different water stress (such as stored hot water and also chilly mains).
It is likewise important to consider the water stress as well as the preparation of the piping and drain for the shower

Various Kinds Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower device can be connected to the bathroom faucet according to your need, and the water temperature level can be readjusted through the faucets. Push-on mixers are cheap and very simple to install. However, although the hose pipe connection is straightforward, it is quickly displaced. Furthermore, it is bothersome to readjust the temperature.

Bath/Shower Mixer: The tube and spray of this sort of shower are combined with a bathroom mixer faucet, as well as the temperature level can be adjusted with the bath taps. It is a really inexpensive alternative and no additional plumbing is entailed. However, the bath/shower mixers likewise deal with troublesome temperature control alternatives.

Manual Mixer: The pipe as well as spray of a hand-operated mixer shower unit belong of the wall surface unit as well as the cold and hot water supplies are linked to a solitary shutoff The temperature as well as stress of the water are regulated through either one or a range of handles (in more expensive showers). Although temperature control is a lot easier in hand-operated mixer kinds, they are much more costly than the formerly stated mixers. They also need extra plumbing of cold and hot water supply pipes.

Thermostatic Mixer: The hose pipe as well as spray of this shower kind belong of the wall surface unit and the hot and cold water materials are attached to a solitary shutoff here too. It is total with a built-in stabiliser to self-adjust the water temperature level and also to stop it from coming to be also warm. One of the biggest advantages of a thermostatic mixer shower type includes practical temperature control. Nevertheless, it is one of the most pricey of the various mixer alternatives.

Power Shower: A power shower is a solitary system consisting of an effective electrical pump that can modifying both the water stress and also temperature level. This sort of shower can be fitted if there is water from a cold water tank and also a warm water cyndrical tube. A power shower makes the change of both stress and also temperature level very easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is supplied by a combination boiler under keys stress.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply and also it warms the water electrically. It is important to keep in mind that for this shower kind to be mounted, the keys stress requires to be at least 0.7 kg/sq centimeters (10lb/sq in). The device allows the temperature level and also pressure to be changed through a knob. Designs with temperature level stabilisers are much better as they stay unaffected by other taps somewhere else being used within the home. A major disadvantage of electric showers is that the control knob only allows for the option of high temperatures at less pressure, or lower temperature levels at a better stress. This is troublesome in the winter season when the spray is typically weak as well as the mains water is chillier. However, this problem is tackled in some versions which are readily available with a winter/summer setup.

Technique

Depending upon the kind of shower you wish to install, the shower head must either be suited order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check valve.
Prior to beginning, it is a good idea to mark the positions of the shower head and also control, and also to prepare the pipe-work included. Additionally, the water drainage system to get rid of the waste water will require to be intended. Both settings of the cable television route and also the shower button will certainly likewise need to be considered if a rapid or electrical shower unit is being installed.
Make use of the direction guide given with the shower system to fit the shower control.Before fitting the pipelines that will supply the water to the shower system, it is necessary to cut off the water. In order to secure the pipes, they must be given a water resistant covering and likewise fitted with isolating shutoffs. The pipelines can then be hidden into the wall surface as well as smudged over to neaten the general appearance.
Fit the base tray, shower head, and installations.
Connect the primary shower control to the pipelines that will be providing the water (This may need a women screw thread adapter).
Reconnect the water system and test the pipelines for any leakages, as some might need firm.
If you are installing an electrical shower, keep in mind to turn off the electricity supply before making any kind of electric connections. When these links have been made (there must be advice within the instruction manual), the power supply can be changed back on.

Changing Water Pressure to Suit Your Shower

The cold water reservoir can be lifted to a better elevation (often as low as 150mm (6inches)) by fitting a strong wood assistance underneath it - potentially composed of struts and blockboards. If you pick this alternative, the primary as well as distribution pipes will certainly also need to be elevated to satisfy the new height of the storage tank.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it should be linked right into the power supply in order to run.

Piping and Drainage

It is best to utilize 15mm diameter supply pipelines, and also make the runs to the shower as brief and also straight as possible so as to keep optimal pressure and also reduce heat loss. Additionally, by reducing using joints for pipe corners, you can decrease the resistance in the circulation of the water system. You can accomplish this by bending the pipelines rather.

A Lot Of Typical Mistakes

Going against or overlooking regional code constraints.

Utilizing pipelines that are too tiny.

Attaching copper to galvanized without making use of a brass or dielectric suitable between both.

Not using tape or pipeline compound at threaded joints.

Not leveling your components when installing them.

Not mounting an air gap filling up for fixtures.

Cutting supply stub outs also short to set up the shutoff valves onto after the ended up wall remains in place.

Not appropriately straightening tubing into installations or stop valves. (Compeling the nut onto the compression ring at an angle when the tubing goes to an angle will certainly cause a leakage.).

When transforming the water back on in your home, constantly run the outdoors hose pipe shutoff or flush your bathrooms to hemorrhage dust and air from the lines. This particles can create problems in your sink faucets and also other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

I came across that article about How to Build a Shower Enclosure for Your DIY Bathroom when doing a lookup on the search engines. Loved our review? Please share it. Help somebody else check it out. We value reading our article about How to Build a Shower Enclosure for Your DIY Bathroom.

Estimate